Amp Heads

  • Aguilar DB751 Bass Amp Head

    R42,595.00
    • Self-Diagnostic Protection Circuit and Thermal Overload Protection Circuit (both with LED indicators)
    • Preamp Section: Three 12AX7’s
    • Power Section: 12 complimentary lateral MOSFETs
    • Transformer: Custom Aguilar toroidal power transformer
    • Effects Loop: Send is push/pull for line or instrument level; Return is push/pull for parallel or series operation
    • Inputs: One 1/4″ input jack with an active/passive switch
    • Outputs: Two Neutrik Speakon speaker outputs, Jensen XLR balanced output (with pre/post EQ and ground lift switch) and Tuner out.
    • Cooling: High quality whisper fans with thermal speed control
    Add to cart
    Quick View
  • Aguilar Tone Hammer 500

    R16,975.00
    • 500W @ 4 ohms, 250W @ 8 ohms
    • Class D power amp
    • Bass, Mid Level, Mid Frequency, Treble tone controls
    • Adjustable Drive control adds subtle distortion and EQ
    • Series effects loop adds 6dB of additional gain, perfect for a broad range of effects units
    • 1/4″ active/passive input
    • 2 Neutrik Speakon outputs
    • XLR balanced output with pre/post EQ and ground lift switch
    • Tuner out
    • 2 high-quality whisper fans with thermal speed control
    Add to cart
    Quick View
  • Aguilar Tone Hammer Bass Amp Head – 350W

    R11,965.00
    • Power Output: 350 watts into 4 ohms, 175 watts into 8 ohms
    • Preamp Section: Solid State
    • Power Section: Class D
    • Transformer: Switching mode power supply (SMPS)
    • EQ Section:
    • Bass: +/- 17 dB @ 40 Hz
    • Mid Level: +/- 16 dB
    • Mid Frequency: 180 Hz – 1 kHz
    • Treble: +/- 14 dB @ 4 kHz
    • Drive Control: Fully adjustable, featuring Aguilar’s proprietary AGS (adaptive gain shaping) circuit.
    • Inputs: One 1/4″ input jack, compatible with all active and passive basses
    • -10dB input pad
    • Speaker Output: Neutrik Speakon
    • Balanced Output: XLR balanced output with pre/post EQ and ground lift switch
    • Tuner output
    • Cooling: High quality whisper fan with thermal speed control
    Add to cart
    Quick View
  • Mark Bass Little Mark 250 Black Line

    R6,200.00

    INPUTS

    • INPUT: impedance 500 Kohm, max. voltage 15 Vpp
    • BALANCED INPUT (XLR): impedance 100 Kohm, max. voltage 25 Vpp
    • EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp

    CONTROLS

    • GAIN: -60 dB to +23 dB range
    • MASTER VOLUME  
    • LINE OUT LEVEL 
    • GROUND LIFT (switch on rear panel)
    • PRE/POST EQ (switch on rear panel)

    EQUALIZATION

    • LOW: center frequency: 40 Hz; level: ±16 dB
    • LOW MID: center frequency: 360 Hz, level: ±16 dB
    • HIGH MID: center frequency: 800 Hz, level: ±16 dB
    • HIGH: center frequency: 10 kHz, level: ±16 dB
    • VPF (Variable Pre-shape Filter) center frequency 380 Hz
    • VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz

    OUTPUTS

    • LINE OUT: balanced XLR, max. voltage 20 Vpp
    • EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
    • TUNER OUT: unbalanced, max. voltage 2 Vpp
    • SPEAKER OUT: speakon/1/4″ combo, 1/4″

    OTHER

    • WEIGHT: 5.07 lbs / 2.3 kg
    • WIDTH: 10.87 in. / 27.6 cm
    • DEPTH: 9.84 in. / 2.5 cm
    • HEIGHT: 3.27 in. / 8.3 cm
    • OUTPUT POWER: 250W RMS @ 4 ohms /  150W RMS @ 8 ohm
    • POWER REQUIREMENT: 100/120V; 230V; 240V – 50/60Hz (Voltage is factory preset according to region of sale)
    Add to cart
    Quick View
  • Mark Bass Little Mark Tube 800 Head

    R16,000.00

    INPUTS

    • INPUT 1: impedance 500 Kohm, max. voltage 15 Vpp
    • INPUT 2: (Balanced XLR/1/4″ combo)
    • BALANCED: impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
    • EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp

    CONTROLS

    • GAIN 1: -60 dB to +23 dB range
    • GAIN 2: -60 dB to +23 dB range
    • MIX: mixes tube and solid state gain
    • MASTER VOLUME 
    • LINE OUT LEVEL 
    • GROUND LIFT (switch on rear panel)
    • PRE/POST EQ  (switch on rear panel)
    • MUTE (push/pull on master knob)

    EQUALIZATION

    • LOW: center frequency 40 Hz; level: ±16 dB
    • LOW MID: center frequency 360 Hz, level: ±16 dB
    • HIGH MID: center frequency 800 Hz, level: ±16 dB
    • HIGH: center frequency 10 kHz, level: ±16 dB
    • VPF (Variable Pre-shape Filter) center frequency 380 Hz
    • VLE (Vintage Loudspeaker Emulator) frequency range 250 Hz-20 kHz

    OUTPUTS

    • LINE OUT: balanced XLR, max. voltage 20 Vpp
    • EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
    • TUNER OUT: unbalanced, max. voltage 2 Vpp
    • SPEAKER OUT: speakon/1/4″ combo, 1/4″

    OTHER

    • WEIGHT: 6.61 lbs / 3 kg
    • WIDTH: 10.87 in. / 27.6 cm
    • DEPTH: 9.84 in. / 2.5 cm
    • HEIGHT: 3.27 in. / 8.3 cm
    • OUTPUT POWER: 800W RMS @ 4 ohms / 500W RMS @ 8 ohms
    • POWER REQUIREMENT: 100/120V; 230V; 240V – 50/60Hz (Voltage is factory preset according to region of sale)
    Add to cart
    Quick View
  • Orange Amplifiers AD200B MK 3 Bass Amp Head – 200 W

    R29,715.00
    • Controls: gain, bass, middle, treble, master
    • Features: Dual output (passive archive), Slave out, Failure fuse
    • Output: 200W (RMS)
    • Tubes: preamp – 2 x ECC83, 1 x ECC81/12AT7; output – 4 x 6550/KT88
    • Speaker impedance: 1 x 8ohms; 2 x 4ohms
    • Dimensions: 21-3/4″W x 9-1/2″H x 11″D
    • Weight: 55-1/4lb.
    Add to cart
    Quick View
  • Warwick Amp Head – 100W W/Bag

    R15,835.00
    • Power: 1,000W (500W + 500W)
    • 2 inputs for active and passive basses
    • Headphone output
    • FX loop
    • Aux. input
    • Balanced output
    • Included footswitch
    • Weight: 5.95 lbs.
    Add to cart
    Quick View
  • Warwick Amp Head – 300W

    R9,035.00
    • Power: 300W
    • Two inputs for active or passive basses
    • Line out with ground-lift switch
    • FX loop
    • Headphone output
    • 19″ size for rack-mounting
    • Weight: 22 lbs.
    Add to cart
    Quick View
  • Warwick Bass Amp Head, 10 band EQ – 600W

    R12,825.00
    • Power: 600W
    • Two inputs for active or passive basses
    • Line out with ground-lift switch
    • FX loop
    • Headphone output
    • 19″ size for rack-mounting
    • Weight: 39.7 lbs.
    Add to cart
    Quick View
  • Warwick Bass Combo – 20W

    R3,095.00
    • Power: 20W
    • 8″ Warwick Custom Speaker
    • 2″ High frequency horn
    • Rugged metal grill
    • 3 Way EQ with controls for bass, mid and treble
    • DDL (Dynamic Distortion Limiter)
    • 2 Inputs for active or passive basses
    • Aux input, mini jack for connecting MP3 player, CD player, etc.
    • Headphone output
    • Weight: 20 lbs.
    Add to cart
    Quick View
  • Warwick BC300 Bass Combo- 300W

    R13,065.00
    • Power: 300W
    • Driver: 15″ Warick custom; 4″ high-frequency horn
    • Two inputs for active or passive basses
    • Line out with ground-lift switch
    • FX loop
    • Headphone output
    • Dimensions: 20.8″ x 22.83 x 16.9″
    • Weight: 61.7 lbs.
    Add to cart
    Quick View
  • Warwick LWA 1000 Amp Head

    R19,215.00
    • 1000 Watt Bass Amplifier Head
    • Delivers 1000 Watts of power at less than 1% THD
    • Lightweight and ultra-portable
    • Noise-free Class A preamp circuitry
    • Class D power amp section
    • Two independent channels
    • Channels can be selected remotely with footswitch
    • Separate Input Gain control for each channel
    • Mute function (separate for each channel)
    • 4-Band equalizer (separate for each channel)
    • Adjustable Compressor with bypass function (separate for each channel)
    • Compression knob simultaneously controls the compression amount and make-up gain
    • Including a metal footswitch for switching between channels and TRS foot switch cable
    • Amp Bag (W A RB 23011) and Rack Ears (W A LWA 1000 RE BLACK, W A LWA 1000 RE SILVER) also available
    • Stereo auxiliary input jack for connecting MP3 player, CD player, etc.
    • Headphone out with integrated stereo headphone amplifier
    • Serial FX Loop
    • Tuner Output
    • Line Output
    • Studio quality balanced DI output with Pre/Post and Ground Lift switches
    • Dual purpose Neutrik / ¼” jack lockable speaker connector
    • Internal temperature regulating fan control circuitry
    • Dimensions (W/H/D): 270mm x 98mm x 146mm / 10.6″ x 3.86″ x 5.75″
    • Weight: 2.75 kg / 5.95 lbs.
    • Available in Aluminium and Black
    Add to cart
    Quick View